南加州大学的机械工程，有9个课程分支，分别为：
1.高级制造
2.燃烧
3.机械设计
4.动力学与控制
5.能源转换
6.流体动力学
7.传热
8.力学与材料
9.固体和结构力学
各分支下的课程设置如下：
1.ADVANCED MANUFACTURING CONCENTRATION
Applie Math Requirement (1 course = 4 units):
AME 525 Engineering Analysis (4 units)
Core Requirements (5 courses = 15 units):
AME 547 Manufacturing Automation
AME 554 Aitive Manufacturing Technologies
ISE 511L Mechatronics Systems Engineering
AME 546 Design for Manufacturing an Assembly
ISE 510 Computational Design an Manufacturing
Core Electives (2 or 3 courses = 8 units):
400-, 500- or 600-level grauate courses by avisement. Elective courses may be from AME, ISE, SAE, or CS. Up to 3 units of irecte research, seminar, an/or internship may be taken as egree creit.
2.COMBUSTION CONCENTRATION
Applie Math Requirement (1 course = 4 units):
AME 525 Engineering Analysis (4 units)
Core Requirements (4 courses = 16 units):
AME 513a Funamentals an Principles of Combustion I (4 units)
AME 513b Funamentals an Applications of Combustion II (4 units)
AME 530a Dynamics of Incompressible Fluis (4 units)
AME 579 Numerical Moeling of Single an Multiphase Reactive Flows (4 units)
Core Electives (2 courses = 7-8 units):
AME 511 Compressible Gas Dynamics (4 units)
AME 515 Avance Problems in Heat Conuction (4 units)
AME 516 Convective Processes
AME 535a Introuction to Computational Flui Mechanics
3.DESIGN CONCENTRATION
Applie Math Requirement (1 course = 4 units):
AME 525 Engineering Analysis (4 units)
Core Requirements (3 courses = 10 units):
AME 503 Avance Mechanical Design
AME 505 Engineering Information Moeling
AME 509 Applie Elasticity (4 units)
Core Electives (2 courses = 6-8 units):
AME 404 Mechanical Engineering Problems
AME 409 Engineering Design Theory an Methoology
ASTE 520 Spacecraft System Design
ASTE 523 Design of Low-Cost Space Missions
AME 527 Elements of Vehicle an Energy Systems Design
AME 528a Finite Element Analysis
AME 541 Linear Control Systems II (4 units)
AME 546 Design for Manufacturing an Assembly
AME 547 Founations for Manufacturing Automation
AME 549a System Architecting
AME 554 Aitive Manufacturing Technologies
AME 588 Material Selections
4.DYNAMICS AND CONTROL CONCENTRATION
Applie Math Requirement (1 course = 4 units):
AME 525 Engineering Analysis (4 units) or AME 526 Engineering Analytical Methos (4 units)
Core Requirements (5 courses = 20 units):
AME 521 Engineering Vibrations II (4 units)
AME 522 Nonlinear Dynamical Systems, Vibrations, an Chaos (4 units)
AME 524 Avance Engineering Dynamics (4 units)
AME 541 Linear Control Systems II (4 units)
AME 552 Nonlinear Control Systems (4 units)
Core Electives (1 course = 3-4 units):
Can be chosen in area of specific interest to the stuent
5.ENERGY CONVERSION CONCENTRATION
Stuents with MS egrees in engineering or science isciplines can be accepte in these programs. Stuents must satisfy all other epartmental egree requirements. Amission requirements follow the general amission rules for aerospace an mechanical engineering grauate programs. For amission requirements, refer to Viterbi Grauate Degrees an Requirements at USC Viterbi School of Engineering . The program requires completion of a minimum of 27 units, with at least 18 units at the 500 level, an a cumulative GPA of at least 3.0 for grauation. Stuents will be given avisement in the first semester of their stuy. A minimum of 15 units must be 500 level courses in major epartment. Four of the require units must be in engineering analysis AME 525. In aition to AME 525 stuents are require to take five core courses covering energy an propulsion, sustainable energy, alternative energy conversion evices, construction management, an sustainable infrastructure systems. Elective courses can be chosen in areas of specific interest to the stuent. Specifically, stuents are encourage to consier electives from other Sustainable Infrastructure Systems programs. Information on the current approve courses that comprise these core an elective requirements is available from the epartment website https://ame.usc.eu/ .
Applie Math Requirement (1 course = 4 units):
AME 525 Engineering Analysis (4 units)
Core Requirements (3 courses = 11-12 units):
AME 513a Funamentals an Applications of Combustion I (4 units)
AME 577 Survey of Energy an Power for a Sustainable Future (3 units)
AME 578 Moern Alternative Energy Conversion Devices (3 units)
Core Electives (2 courses = 7-8 units):
AME 436 Energy an Propulsion (3 units)
AME 513b Funamentals an Applications of Combustion II (4 units)
AME 515 Avance Heat an Mass Diffusion (4 units)
AME 516 Convective Processes
AME 530a Dynamics of Incompressible Fluis (4 units)
6.FLUID DYNAMICS CONCENTRATION
Applie Math Requirement (1 course = 4 units):
AME 525 Engineering Analysis (4 units)
Core Requirements (3 courses = 11-12 units):
AME 530a Dynamics of Incompressible Fluis (4 units)
AME 511 Compressible Gas Dynamics (4 units)
AME 535a Introuction to Computational Flui Mechanics
Core Electives (2 courses = 6-8 units):
AME 506 Continuum Mechanics an Thermoynamics (4 units)
AME 436 Energy an Propulsion
AME 513a Funamentals an Applications of Combustion I (4 units)
AME 513b Funamentals an Applications of Combustion II (4 units)
AME 515 Avance Problems in Heat Conuction
AME 516 Convective Processes
AME 533 Multi-Phase Flows
AME 535b Introuction to Computational Flui Dynamics
AME 537 Microfluiics
AME 651 Statistical Theories of Turbulence
7.HEAT TRANSFER CONCENTRATION
Applie Math Requirement (2 courses = 8 units):
AME 525 Engineering Analysis (4 units)
AME 526 Engineering Analytical Methos (4 units)
Core Requirements (3 courses = 11 units):
AME 515 Avance Problems in Heat Conuction (4 units)
AME 516 Convective Processes
AME 530a Dynamics of Incompressible Fluis (4 units)
Core Electives (2 courses = 7-8 units):
AME 511 Compressible Gas Dynamics (4 units)
AME 513a Funamentals an Applications of Combustion I (4 units)
AME 535a Introuction to Computational Flui Mechanics
8.MECHANICS AND MATERIALS CONCENTRATION
Applie Math Requirement (2 courses = 8 units):
AME 525 Engineering Analysis (4 units)
Core Requirements (3 courses = 9-12 units):
AME 506 Continuum Mechanics an Thermoynamics (4 units)
AME 509 Applie Elasticity (4 units) or CE 507 Mechanics of Solis I or AME 560 Fatigue an Fracture
AME 588 Materials Selection or MASC 551 Mechanical Behavior of Engineering Materials
Core Electives (2 courses = 6-8 units):
AME 524 Avance Engineering Dynamics (4 units)
AME 522 Nonlinear Dynamical Systems, Vibrations, an Chaos (4 units)
AME 521 Engineering Vibrations II (4 units)
CE 529a Finite Element Analysis
CE 541a Dynamics of Structures
CE 507 Mechanics of Solis I
AME 542 Theory of Plates
9.SOLID AND STRUCTURAL MECHANICS CONCENTRATION
Applie Math Requirement (2 courses = 8 units):
AME 525 Engineering Analysis (4 units)
Core Requirements (3 courses = 12 units):
AME 506 Continuum Mechanics an Thermoynamics (4 units)
AME 509 Applie Elasticity (4 units)
AME 524 Avance Engineering Dynamics (4 units)
Core Electives (2 courses = 6-8 units):
AME 522 Nonlinear Dynamical Systems, Vibrations, an Chaos (4 units)
AME 521 Engineering Vibrations II (4 units)
CE 529a Finite Element Analysis
CE 541a Dynamics of Structures
CE 507 Mechanics of Solis I
AME 560 Fatigue an Fracture
AME 542 Theory of Plates
AME 588 Materials Selection
AME 539 Multi-boy Dynamics (4 units)
